Dive-N-Dog Swim Platforms
P. O. Box 1278
Marco Island, FL 34146
(941) 375 3565 Ph
(877) 567 4602 Toll-free
(941) 375 3217 Fx
Ladder Platform II
(Click on any image below to enlarge it.)
A Vast Improvement Over Existing Boarding Ladder and Swim Platform Designs!
)
|
|
)
|
|
Specification |
16 |
12 |
| Stored Length: | 16-20" | 14-16" |
| Stored Width (centerline dimension): | 14" | 10" |
| Stored Height: | 1.5 - 2.75" | 1.5 - 2" |
| Mounting Bracket Length: | 6" | 6" |
| Mounting Bracket Width: | 1.25 - 2.25" | 1.25-1.75" |
| Deployed Length: | 2step~23" 3step~34" 4step~45" 5step~56" 6step~67" |
2step~23" 3step~34" 4step~45" |
Specification |
For 3 or 4 Step |
| Length: | 16" |
| Width: | 14.5"(for 12" ladders), 18.5"(for 16" ladders) |
| Height(under platform): | 4.5" |
(Click on any image below to enlarge it.)
Select a mounting location that will provide a strong, solid and reliable surface. Avoid weak areas or uneven surfaces. Ensure that when deployed, there is adequate clearance between propellers and other dangerous items.
Place the product in the desired mounting location with the brackets attached and mark the position of the mounting brackets.
)
Once the brackets have been marked, remove the product and mark each of the mounting brackets two holes.
)
The telescoping functionality of the product may bind excessively if the mounting brackets are not installed in a parallel fashion. Before drilling any mounting holes, place the product into its proposed location and ensure that its range of motion necessary for deployment and retrieval is not impeded by any boat surface or structure.
Drill a 1/4" hole for each of the marked mounting bracket holes.
)
The product should be mounted with 1/4" diameter stainless steel bolts. The bolts should have large washers or a backing plate to help to distribute the load incurred when the product is fully deployed.
)
Tighten the bolts, making sure the mounting brackets are firmly attached to the mounting surface.
)
Finally, insert the 1/4" bolt through each arm of the unit. Make sure to check and finalize all installations prior to deploying, retrieving, or climbing on the product.
)
If your mounting surface is unique, please contact us or send a digital picture. We may have some ideas or have solved the same problem for someone else already!
)
**For dimensions see the "Dimensions" link to the left.
Disclaimer: This ladder platform can be dangerous and cause bodily harm if not installed or operated correctly.
(Click on any image below to enlarge it.)
)
To deploy, lift the ladder platform off the deck surface. Rotate the
ladder platform on its mounting brackets until vertical.
)
Push the ladder platform past vertical toward the water and release to let it sink into the water.
)
)
The momentum of this action as well as gravity will fully extend the
ladder platform.
)
The ladder platform is now deployed and ready to use.
)
To retrieve the platform, pull the QuickTrieve handle.
)
Continue pulling on the QuickTrieve handle to lift the ladder platform out of the water until it is vertical.
)
Fold the ladder platform flat and the Click Slide brackets will fold into their storage position.
Be careful not to place hands or fingers in between the ladder platform and the Click Slide brackets or they may get caught. Lay the stair platform flush on the deck.
Disclaimer: This ladder platform can be dangerous and cause bodily harm if not installed or operated correctly.
The ladder platform is designed and manufactured to require little maintenance; however, a few simple items will extend the life of your product:
- Periodic washing off with fresh water, both inside and out
- Periodic lubrication of the telescoping arms using silicone or similar substance (thoroughly spray into the hole in the bottom and top caps)
- Wipe down the product from time to time to remove dirt and grime
- Periodic polishing with a stainless steel polish for marine applications
- Periodic inspection of the mounting brackets for safety and deterioration of the mounting surface
Safety Tips:
- Keep fingers and toes clear of telescoping arms.
- Do not jump on the ladder, or dive from the ladder.
- Step in the center of ladder steps.
- Only one person should ascend the ladder at a time.
- Face the ladder when ascending or descending.
- Do not use the ladder while engine is running.
Disclaimer: This ladder platform can be dangerous and cause bodily harm if not installed or operated correctly.
)
)
)
)
)
)
)
){kind=link}
){kind=link}
){kind=link}